-
The BJM LWA-Series submersible lightweight agitator dewatering pumps are built with hard metal and intended to dewater sand, silt, coal and other abrasive slurries. A chrome iron impeller and a hardened ductile iron agitator reinforce the system for extreme durability... -
The AWG conductor plus ground oil, water, and weather resistant (SOOW) motor lead cables come with either a 12 gauge or 8 gauge configuration. The construction of this pump cable exceeds the electrical and physical test parameters of UL standards... -
Hi-Lo Supreme 8 AWG 3 conductor plus ground jacketed submersible pump cable. Insulated and jacketed with a premium thermoplastic elastomer (TPE) material. PACKAGE CABLE Hi-Lo supreme jacketed type, UL approved cable furnished in pre-cut lengths with water tight Viton plug... -
The Hi-Lo Supreme AWG cables are conductor plus ground twisted submersible pump cables that are insulated with premium thermoplastic elastomer (TPE) materials. They come in various gauges and numbers of wires. Package cable: The Hi-Lo supreme twisted type UL approved... -
The construction of this pump cable exceeds the electrical and physical test parameters of UL standards 83 that covers a deep well submersible pump cable. They come with two or three wires. The individual insulated primary conductors have a .032”... -
The construction of this cable exceeds the parameters of UL Standard44 that covers deep well submersible pump cables. The individual primary wires utilize an extruded, heavy wall ETFE or FEP fluoropolymer which meets the requirements of National Electrical Code 310,... -
Submersible environmental motors are available in 4″ to 6″ platforms. Featuring a corrosion-resistant construction, and stainless steel splined shaft. Horsepower ranging from 3 to 60. We offer single phase(220-240V) and three phase(200-240/380-460/575V). All seals are comprised of Viton rubber material.... -
Franklin pollution recovery motors are designed for use in environmental wells 4” or larger in diameter. Their motors share the same electrical characteristics as their water well motors. The elastomers are comprised of FKM & EPDM. A continuous chemically resistant... -
Available are blower packages for in-situ air sparging and bio-venting applications. These blower packages are base-mounted units that incorporate rotary positive displacement, rotary vane, or regenerative type blowers, depending on the application flow and pressure The Vacuum Enhanced Extraction System... -
Used to chlorinate water, wastewater and industrial process water with gas chlorine. Simple, efficient, and built with heavy duty corrosion resistant parts, Regal chlorinators provide safe, long-lasting service. InquiryProduct Data Sheet -
Package Cable: The Flat Parallel Type THW, UL approved cable is furnished in pre-cut lengths with a watertight neoprene plug on one end for direct connection to a Franklin motor. It has a stranded copper conductor and two or... -
The BJM KZN-Series heavy duty submersible agitators are slurry pumps built for industries that see the most pumping-related difficulties. It’s capable of dealing with food wastes, lime slurries, slag pits, ash transfer, and far more. Each pump is built with... -
The BJM submersible SK/SKX Shredder Pumps are created to handle united debris in wastewater, from plastic toys to beer cans and fibrous solids. It does this by breaking and ripping these items apart as they enter the system with 360... -
Liberty sewage pumps come in four models: the LE50-Series submersibles, the LE70-Series submersibles, the LE100-Series submersibles, and the LEH100-Series high head sewage pump. The right pump for you depends on the scale of your operation, as each increasing number corresponds... -
Able to handle solids up to 3" in size, the Goulds 4SD submersible sewage pump features a dual seal with a seal sensor probe, a cast-iron, two-vane, semi-open impeller with clog protection. The impeller is balanced to operate smoothly, and... -
Able to handle solids up to 2.5" in size, the Goulds 3SD submersible sewage pump features a dual seal with a seal sensor probe, a cast-iron, two-vane, semi-open impeller with clog protection. The impeller is balanced to operate smoothly, and... -
The Goulds WE Series 3885 submersible effluent pumps feature impellers made of cast iron. They are semi-open and clog-resistant thanks to pump-out vanes and offer mechanical seal protection. Silicon bronze impellers are also an option. The shaft and fasteners are... -
Cornell self-priming SP pumps use shimless impellers with external covers for easy adjustments, eliminating the need to realign belts, couplings, and various drive components. A back pullout rotating assembly allows for removal without dismantling the pump or altering the piping.... -
Goulds Primeline SP pumps from the SPM & SPH series feature a self-priming design with a replaceable check valve to allow for quick, dependable priming and re-priming. They also feature silicon bronze construction on the impeller and wear ring. The... -
The Franklin Close-Coupled D-Series centrifugal pump features an extremely durable heavy-duty cast iron body with impellers that vary from stainless steel, bronze, and cast iron impellers depending on the model. These pumps are ideal for applications in the irrigation, commercial,... -
InquiryProduct Data Sheet -
Grundfos Teflon™ fitted pump ends feature an all stainless steel and Teflon™ construction. Suitable for applications such as environmental, leachate, remediation, PFAS (Per- and Polyfluoroalkyl Substances), ground water sampling, salt water/sea water, oil & gas, and refineries. Each pump is... -
The Yaskawa P1000 is the latest in industrial fan and pump drive technology, intended specifically for variable torque needs. These devices are extremely intuitive and user friendly. They allow for a large range of network and control options, making them... -
Franklin’s coalbed methane submersible motors are designed for optimum dependability in coalbed methane wells a minimum of 4” in diameter. Time rating and temperature are continuous in 30 degrees celsius water at ¼ ft. per second past the flow motor.... -
The BJM KZN-Series heavy duty submersible agitators are slurry pumps built for industries that see the most pumping-related difficulties. It’s capable of dealing with food wastes, lime slurries, slag pits, ash transfer, and far more. Each pump is built with... -
Incorporating specially designed components to withstand the rigors imposed on them, these special pumps are highly durable to deliver top notch performance under the most adverse situations. InquiryProduct Data Sheet -
Grundfos’ new 4” CBNG submersibles feature durable corrosion-resistant stainless steel construction and an enhanced wear resistant design for harsh, abrasive CBNG environments. InquiryProduct Data Sheet -
CTT-CBM flat cables are ideal for use in deeper CBM wells where temperature is hotter and higher pressures are a consideration due to well depth. This is also an excellent cable in water well applications where large quantities of CO2... -
InquiryProduct Data Sheet -
InquiryProduct Data Sheet -
The Goulds 3657/3757 stainless steel end suction pumps feature an enclosed impeller design for maximum efficiency and a back pull-out design that makes maintenance simple. Installation is easy thanks to its frame-mounted design. The stainless steel corrosion is both strong... -
Grundfos Redi-flo4 submersible pumps are made of stainless steel and virgin PTFE, so they are equipped to handle rigorous contaminated groundwater pumping. These pumps are designed for both sampling and continual operation in a variety of remedial applications. These pumps... -
Inquiry -
Grundfos Redi-flo variable frequency drives are intended for use with the Grundfos Redi-Flo2 variable frequency pump. This drive allows the user to precisely control the flow rate from the variable frequency pump from 9 GPM to depths up to 250... -
The Yaskawa iQpump intelligent pump drive family features a variety of different packages with advanced and comprehensive pump and motor protection. These pump drives are easy to use while working well with a variety of applications, including flow, geothermal, constant... -
The Grundfos Redi-Flo2 sampling pump purges and samples contaminated groundwater. It’s designed to work with groundwater in boreholes with an internal diameter of 50 mm minimum. It also works best with water that has a sand content below 50 g/m^3,... -
Inquiry -
Inquiry -
The SS Geosub stainless steel sampling pump is the most versatile single stage DC pump in the industry. The SS Geosub gives you the ability to confidently collect samples even when dealing with harsh conditions. For best results, operate this... -
The XLPE/CPE motor lead features extruded cross-linked polyethylene material for insulation and extruded CPE jacket material. It is water and oil-resistant and rated for 90° C. The sleeve and jam nut both consist of stainless steel. InquiryProduct Data Sheet -
The Seametrics WJ-Series turbine meters are dry-register mechanical totalizers that offer accurate and efficient information regarding high flows with low pressure loss. The horizontal axis turbine uses a vertical shaft that’s magnetically attached to the sealed register. InquiryProduct Data... -
Franklin’s MH series of horizontal multistage centrifugal booster pumps are the ideal pumps for your pressure boosting needs. Stainless steel allows for optimized performance in a wide spread of applications, and the varying flow rates and horsepower capabilities ensure you... -
Goulds’ e-HM series of horizontal multistage pumps are highly customizable and are a fantastic solution to water needs for the vast majority of buildings, from single-family homes to ten floor apartment buildings. Highly efficient hydraulics will reduce your energy bill... -
Goulds’ e-HM series of horizontal multistage pumps are highly customizable and are a fantastic solution to water needs for the vast majority of buildings, from single-family homes to ten floor apartment buildings. Highly efficient hydraulics will reduce your energy bill... -
The Seametrics WMP-Series plastic-bodied magmeter is a fantastic tool for usage monitoring for gray water, industrial waste discharge, irrigation, well monitoring and more. This tool is designed for 1, 2, and 3 inch pipes. It’s light, easy to install, and... -
The Seametrics iMag 4700 series flanged magmeter is an ideal meter for water treatment, municipal applications, pump stations and skids, filtration systems, and more. It’s among the most economical flanged electromagnetic flowmeters available. InquiryProduct Data Sheet -
The MJ-series pulse meters use the multijet principle, a widely-accepted, long-running standard. These meters are renowned for their wide range, ease-of-use, and accuracy in both high-quality and low-quality water. They come in both hot and cold water models. These meters... -
The Seametrics WJ-Series turbine meters are dry-register mechanical totalizers that offer accurate and efficient information regarding high flows with low pressure loss. The horizontal axis turbine uses a vertical shaft that’s magnetically attached to the sealed register. InquiryProduct Data... -
The Seametrics WJ-Series turbine meters are dry-register mechanical totalizers that offer accurate and efficient information regarding high flows with low pressure loss. The horizontal axis turbine uses a vertical shaft that’s magnetically attached to the sealed register. InquiryProduct Data... -
The Seametrics WJ-Series turbine meters are dry-register mechanical totalizers that offer accurate and efficient information regarding high flows with low pressure loss. The horizontal axis turbine uses a vertical shaft that’s magnetically attached to the sealed register. InquiryProduct Data...
