PumpsOk

Solar Pumps

Comments Off on Solar Pumps

PumpsOK custom fabricates solar irrigation solutions to fit your application, and we build them to run cleaner, quieter, and more economically. Our solar pumping systems produce no emissions and generate no noise. They’re more reliable than wind power and significantly cheaper and cleaner than diesel power. 

Solar Pump Benefits

  • Renewable energy supply. Solar panels are a clean, sustainable energy source, producing no noise and no emissions.
  • Built-in electronics, easy installation. Solar pumping systems are plug-and-play. Simply installing the pump and wiring it to the panels allows for basic use. This eliminates the need for complex control systems and eases installation.
  • Reliable water supply. Eliminate dependence on unreliable electrical service and unpredictable electrical issues. A battery backup system can be utilized during periods of limited solar exposure, so even when the sun is not shining, you can have a steady supply of water.
  • Low operating costs. Solar pumping systems eliminate most operational costs. After the initial investment, these units can provide water with minimal upkeep and no additional electrical bills. Traditional electrical pump systems not only add a monthly expense, but in many rural applications, an electrical service can be extremely costly to run upon installation.
  • Dry-running protection. Solar pumps can be purchased with electrode sensors that will shut the pump down as well water drops to levels that would cause damage to the motor, eliminating the need for costly external float or sensor systems. This sensor can be set at an adjustable height above the pump and will automatically restart the pump once the water has risen above the electrode for a set amount of time.
  • Built-in motor protection. Many of our solar pump units come standard with over and under-voltage protection, allowing the motor to sense the voltage drops or spikes and adjust to protect the motor from unnecessary damage. If the motor exceeds the overload limit, the motors can automatically reduce their speed to compensate for the change and continue providing water flow. If the motor falls below a certain RPM it will shut down and restart automatically. This allows the motor to protect itself but eliminates the need for a trip to the site for a manual restart.
  • High efficiency. Solar pump motors are equipped with permanent-magnet motors. These are much more efficient in comparison to a standard asynchronous motor. The higher efficiency allows the motor to pump more water per horsepower, eliminating the need for oversizing the panel array and saving on installation costs.
  • Maximum Power Point Tracking (MPPT). Many of the solar pumps available from PumpsOK come standard with a microprocessor, which provides continuous duty-point optimization according to the input power. This automatically calculates the optimal efficiency based on the power available. So the motor will adjust itself and always give you the most efficient and highest water yield based on the power currently available.
  • Wide voltage range. Solar Pumps can operate from 30-300 VDC or 90-240 VAC. This allows for easier sizing in wide levels of well depth for each pump. The wide depth range allows for an easy pump selection in which a pump’s depth can be adjusted simply by adding available wattage. 
  • Built-in sand shield. Prevents sand damage to the pump by slinging it away from the working parts at the base of the pump end. Sand can destroy your pump’s internal components. This shield adds to the longevity of a solar pump in extra sandy applications

How solar pumping systems work

The SQFlex family is an environmentally friendly water supply system. SQFlex pumps are fitted with a permanent magnet motor that enables the efficient use of energy from a wide range of supply options. The pump system offers the perfect water supply solution in remote areas where water is scarce and the power supply is non-existent or unreliable.

The SQFlex system is flexible to its energy supply and performance. It can be combined and adapted to any need according to the conditions on the installation site. A battery backup system can store the extra energy generated and take over when the primary energy source is not available.

SQFlex is more than just a pump—it’s a complete system. Thanks to its built-in electronics, the pump is compatible with both DC and AC power supplies without requiring an external inverter.

The complete range consists of eleven different pump sizes: Five helical rotor pumps for applications where a high head is required, and six centrifugal pumps for applications where a greater flow rate is necessary.

Solar Pump Applications

Being designed for continuous, as well as intermittent operation, the SQFlex system is especially suitable for water supply applications in remote locations, such as:

  • Rural villages, schools, hospitals, single-family houses, etc.
  • Farms
  • Watering cattle
  • Irrigation of fields and greenhouses
  • Game parks and game farms
  • Watering applications
  • Conservation areas
  • Surface water pumping
  • Floating pump installations for pumping water from ponds and lakes

Solar Pumps in Developing Countries

The Grundfos SQ Flex solar-powered water pump systems have been installed in remote third-world countries as the primary water supply for villages that have no access to electricity. In locations like Southern China, Tibet, Sierra Leone, and throughout West Africa, these solar pumping systems have proven to be portable, easy to set up, and very reliable with minimal maintenance.

In these poverty-stricken areas of the world, residents typically use a bucket and rope system to retrieve their daily water needs. With Grundfos solar pump systems installed, these wells can be sealed at the surface. The pump can then deliver water to a storage tank, greatly reducing water-borne pathogens and increasing the quality of life for the village, all while utilizing renewable energy as the primary power supply.

Comments are closed.